Fluid Audio DS5 desktop monitor mounts are designed to be used with all monitors Studio 4 "and 5". With the accessories, you will be able to raise them of 635mm or 1270mm. Supplied with the rubber feet, the supports become an acoustic insulation system that can be adapted to three angles: flat, 3 or 6 degrees of inclination. By elevating your monitors as close to ear level, you get a better response in the axis. As the high frequency tweeters come (they are rather directional), the closer or put them at ear level means a more complete listening frequency. Made from MDF, they are sturdy and well damped noise nuisance. The bar supports are made of polypropylene, the top and bottom of the stands are covered with extremely absorbent rubber feet, a durometer hardness of 40. The result of the construction of the support allows your monitors to play sounds and produce tones much more pure and less deformed medium.

desktop monitor brackets Fluid Audio DS5 are designed to be used with all studio monitors in 7 "and 8". With the accessories, you have the opportunity to raise the 762mm or 1524mm. Supplied with the rubber feet, the supports become an acoustic insulation system that can be adapted to three angles: flat, 3 or 6 degrees of inclination. By elevating your monitors as close to ear level, you get a better response in the axis. As the high frequency tweeters come (they are rather directional), the closer or put them at ear level means a more complete listening frequency. Made from MDF, they are sturdy and well damped noise nuisance. The bar supports are made of polypropylene, the top and bottom of the stands are covered with extremely absorbent rubber feet, a durometer hardness of 40. The result of the construction of the support allows your monitors to play sounds and produce tones much more pure and less deformed medium.

The monitors of the FX series are studio monitor speakers made high performance and designed around a coaxial speaker. This technology guarantees an exemplary dispersion and optimum phase coherence. The range consists to date of 2 models, 5 and 8 inches to meet the various uses.

NIS-2 is a 2x4 versatile audio interface manufactured around a sturdy aluminum chassis. The ULC-2 is equipment to typing and refined design, it offers outstanding audio quality and functionality. The best digital converters capture detailed nuance of each recording. The volume knob provides precise control of output and direct monitoring monitors without latency. The combo inputs and headphone jack are positioned on the front edge and the outputs (X2) of the speakers on the rear part. Note a really unique feature of the SRI-2, there is a switch to be pregnant, you can perform your A / B mix two different pairs of speakers. Entries combo XLR / Jack have a 48V phantom power, you can switch the instrument inputs or line and adjust their gain individually. Upon another aspect of this very interesting SRI-2, one can switch between input and STAN and use the interface as a monitoring controller. A Speaker section is available which allows you to switch between two pairs of speakers, perfect for fine and precise tapping. Finally, the SRI-2 is compatible with Mac, Windows and iOS devices.

C5 are studio monitors high quality specially designed for mixing. With a compact and sleek design, the C5 Fluid Audio are perfect for a variety of users such as DJs, producers, musicians, video editors or gameurs. C5 studio monitors are compact but powerful, thanks to an integrated class AB amplifier. The combination of the tweeter diaphragm 1 inch and of woofer 5-inch composite cone provides a frequency range of ultra wide. The result is audio fidelity and exceptional sound reproduction, capturing every nuance of your sound with high-end transparency. The pack is composed of an active monitor including amplification, the inputs / outputs and the volume control and a passive monitor connecting to the first on red and black terminals.

The monitors of the FX series are studio monitor speakers made high performance and designed around a coaxial speaker. This technology guarantees an exemplary dispersion and optimum phase coherence. The range consists to date of 2 models, 5 and 8 inches to meet the various uses.

The F8S is amplified subwoofer designed for recording studios and home studios. However, it fit right into a home theater or gaming system. The F8S Fluid Audio F8S will offer an exceptional bass response while maintaining a compact size. The current music require involve the use of a bass reinforcement whether mix or listening. Able to listen to your mix with the bass reinforcement is key to creating your music with precision. The low F8S box will allow you to hear every detail up to 30Hz. The F8S also has two integrated EQ settings that allow you different settings according to the type of music.

The FXP7 is an active studio monitor two channels made around a coaxial loudspeaker and amplified with class AB amplifiers reinforced. The bass speaker is composite and the tweeter is a TN tape. The product FPX7 you a unique experience in terms of studio monitoring in this price range. The coaxial loudspeaker specially developed by Fluid Audio, ensures exemplary dispersion and optimum phase coherence. The FXP7 Fluid Audio will adapt perfectly and perfect home studio or studio.